Richard Paul Russell Ltd
Home > Products > WindSonic Wind Systems > WS-15A Display > Specification
View live wind data from our wind systems at Lymington, Hurst Castle and Portland Harbour (The 2012 Olympic sailing venue)
| Physical | Dimensions | Width: 140mm (including mounting feet) Depth: 100mm (including cable glands) Height: 65mm (including mounting feet) |
| Panel Dimensions | 120mm x 80mm | |
| Weight | 0.35 kg | |
| Mounting | Surface mounted | |
| Material | Light Grey Polycarbonate | |
| Cable access | 4 waterproof glands | |
| Power | Power requirements | 9 to 30 Vdc |
| Current at 12 Vdc | 20mA to 35mA (backlight on) | |
| Supply Input protection | Polarity reversal protected. Internal fuse 1 amp Littelfuse 452 or 454 series | |
| Connection | Internal lever action terminals for AWG 28 to 22 conductors | |
| Environmental | Temperature | Operating range: -10șC to +70șC |
| Sealing | IP65 | |
| EMC | EN61326:1977, EN60945:2002 (emissions) EN61326:1997 (immunity) |
|
| Display Operation | Display | Two line 20 character dot matrix super-twist LCD with backlight |
| Operation | 5 keys on front of unit for menu navigation, data entry and control functions | |
| Functions | Wind Speed | |
| Wind direction | ||
| Wind speed high/low alarm with hold on and hold off period | ||
| Sensor alignment | ||
| Wind speed measurement units | ||
| Contrast | ||
| Backlight | ||
| Sensor selection | ||
| Wind direction display | Digital 3 digits with wind arrow and cardinal points | |
| Wind speed display | Digital display with units selection from kts, mph, km/h, fpm, m/s | |
| Sensor status | Error code displayed for sensor/ communications failure or unreliability | |
| Connectivity | Wind sensor | WindSonic sensor outputting RS232 or RS422/RS485 at 9600 baud in factory default format |
| Alarm output | Volt free relay output. Max 24Vdc at switching current of 0.5 amperes. Contact resistance 0.150 ohm maximum | |
| Data output | RS232 for connection to a data logger, computer, communications equipment or additional WS-15A display units | |
| The manufactures reserve the right to amend the specification and therefore the information in this document may be subject to change | ||
view
cart